xTool F1 Ultra jig for 2 in round acrylic keychain blanks
With 0.2 mm clearance per side, 3 mm webs and a 5 mm margin, the xTool F1 Ultra's 220 × 220 mm work area fits 12 pockets for 2 in round acrylic keychain blanks, in 4 staggered rows. A straight grid would hold 9; offsetting every other row by half a pocket gains 3.
- Blanks per run
- 12
- Layout
- 4 staggered rows
- Blank
- 50.8 × 50.8 × 3.18 mm (2 in Ø × 1/8 in)
- 51.2 × 51.2 mm
- Clearance
- 0.2 mm per side
- Jig
- Laser-cut 3 mm sheet, through-holes
- Plate
- 220 × 220 mm, 5 mm margin, 3 mm webs
- Tallest point
- 3.2 mm (limit 145 mm)
- Cut path
- 2.8 m
Cut file in millimetres: red = cut, blue = engraved labels and marks. Adjust anything below and download the 3MF, STL, DXF and alignment template.
What to know before you cut
The 0.2 mm starting clearance assumes a laser-cut acrylic, MDF or plywood jig. Cut the test-fit coupon (0.0 to 0.5 mm) in the generator before the full plate: blanks from different suppliers vary, and the laser's kerf makes cut holes slightly larger than drawn.
As a laser-cut 3 mm sheet with through-holes, the blanks rest on the bed or honeycomb and stand 0.18 mm above the sheet.
xTool F1 Ultra is a galvo machine: the field is centred, so the jig is placed in the middle of the 220 mm field and the plate carries engraved centre ticks on each edge to line up with the framing crosshair. Keep the jig the same thickness every time and the focus height stays the same.
Adjust this jig
The generator below starts from this machine and blank. Change the clearance, layout or jig build, then download the files.
12 pockets, 4 staggered rows, on a 220 mm × 220 mm plate.
- Pockets
- 12
- Plate
- 220 mm × 220 mm
- Cut path
- 2.8 m
- Sheet used
- 484 cm²
- Tallest point
- 3.2 mm of 145 mm
Cut it
Red = cut, blue = engrave. Millimetre units.
Print it
Through-holes in a plate. Millimetres.
Line up the artwork
Template with pocket centres, blank edge, bleed and safe area, placed where the jig sits on the machine.
Other xTool F1 Ultra jigs
- Military-style dog tag: 18 per run
- Pocket lighter, regular case: 15 per run
Acrylic keychain, 2 in round jigs for other machines
- eufyMake UV Printer E1: 40 per run
- xTool O1 Omni (UV printer): 40 per run
- xTool F2 Ultra UV (UV laser): 9 per run
- Glowforge Pro / Plus / Basic: 40 per run
Guides
Sources
- xTool F1 Ultra specifications (xTool support) (work area, checked 2026-10-17)
- 2 in round acrylic keychain blanks (Walmart listing) (blank size)
Machine and product names are used only to describe compatibility. Pocketplate is not affiliated with xTool.
Get blank packs and Pro first
Everything here is free during the beta. Ready-made packs for common blanks and a Pro tier are next. Tell us which one you would pay for.