eufyMake E1 jig for military-style dog tag blanks
With 0.3 mm clearance per side, 4 mm webs and a 10 mm margin, the eufyMake UV Printer E1's 330 × 420 mm work area fits 63 pockets for military-style dog tag blanks, in 7 rows of 9 with the blanks turned 90°. Staggering the rows does not help with this shape, so the grid is the best layout.
- Blanks per run
- 63
- Layout
- 7 rows of 9, turned 90°
- Blank
- 50.8 × 28.6 × 0.6 mm (2 × 1-1/8 in)
- 29.2 × 51.4 mm
- Clearance
- 0.3 mm per side
- Jig
- 3D-printed, 2.6 mm plate, 0.6 mm pockets
- Plate
- 330 × 420 mm, 10 mm margin, 4 mm webs
- Tallest point
- 2.6 mm (limit 100 mm)
- Solid volume
- 304 cm³, about 377 g of PLA at 100 % infill
Cut file in millimetres: red = cut, blue = engraved labels and marks. Adjust anything below and download the 3MF, STL, DXF and alignment template.
What to know before you cut
The 0.3 mm starting clearance assumes a 3D-printed jig without hole compensation. Cut the test-fit coupon (0.0 to 0.5 mm) in the generator before the full plate: blanks from different suppliers vary, and printed holes usually come out slightly undersize.
As a 3D-printed plate 2.6 mm thick with 0.6 mm deep pockets, each 0.6 mm blank stands 0 mm proud of the jig and its top is 2.6 mm above the bed, within the 100 mm the eufyMake UV Printer E1 accepts.
The full 330 × 420 mm plate is larger than a 256 mm 3D-printer bed. The 3MF from the generator splits it into 4 tiles along the webs between pockets, so no pocket is cut in half; glue them to a flat backing board and push it into the same corner of the bed each time.
The 3.5 mm corner radius is an estimate; measure one blank and adjust it in the generator if the corners bind.
Adjust this jig
The generator below starts from this machine and blank. Change the clearance, layout or jig build, then download the files.
63 pockets, 7 rows of 9, turned 90°, on a 330 mm × 420 mm plate.
- Pockets
- 63
- Plate
- 330 mm × 420 mm
- Cut path
- 11.24 m
- Solid volume
- 304 cm³ ≈ 377 g PLA
- Tallest point
- 2.6 mm of 100 mm
Volume is the solid model; your slicer's infill makes the real print lighter.
Cut it
Red = cut, blue = engrave. Millimetre units.
Print it
Plate with pocket recesses. Millimetres.
Line up the artwork
Template with pocket centres, blank edge, bleed and safe area, placed where the jig sits on the machine.
Other eufyMake E1 jigs
- Acrylic keychain, 2 in round: 40 per run
- Coaster, 4 in square: 6 per run
- Coaster, 3.75 in round cork-back: 12 per run
- AirPods Pro 2 case: 36 per run
- iPhone 17 Pro Max case: 6 per run
- Golf ball: 54 per run
- Metal ballpoint pen: 52 per run
- Metal business card: 21 per run
- Acrylic keychain, 2.5 in heart: 32 per run
Military-style dog tag jigs for other machines
- xTool F2 Ultra UV (UV laser): 18 per run
- Glowforge Pro / Plus / Basic: 64 per run
- xTool F1 Ultra: 18 per run
Guides
- eufyMake E1 jig: bed size, height limits and layouts
- UV printer jig: how to make one that holds every blank
- Alignment templates for UV printing
- Jig clearance: how much gap per side
Sources
- eufyMake E1 specifications (work area, checked 2026-10-17)
- eufyMake July 2026 release notes (work area, checked 2026-10-17)
- Aluminum dog tag blank (mPower Promo) (blank size)
Machine and product names are used only to describe compatibility. Pocketplate is not affiliated with eufyMake.
Get blank packs and Pro first
Everything here is free during the beta. Ready-made packs for common blanks and a Pro tier are next. Tell us which one you would pay for.